Low maintenance, weather-ready, and built to last decades. Hundreds of styles and colors to match your home's character.
Call for a Free Quote: +1-844-782-0929
We focus on exterior cladding, and vinyl siding is a core specialty. We stock multiple grades, know the brands, and understand how each product performs across New Hartford, CT's seasonal conditions.
We bring samples to your property in New Hartford so you can evaluate colors and textures against your actual roofline, trim, and landscaping before committing to an order.
Proper installation technique matters as much as product quality. We cut on score, nail in the center of slots, leave correct overlap, and seat J-channels and trim pieces so the system performs as designed.
We only install products from manufacturers whose warranty terms we stand behind. We walk you through coverage before the project starts so you understand exactly what is protected.
Complete vinyl siding installation on new construction or over-existing cladding. We handle prep, house wrap inspection, and full installation with proper trim, flashing, and accessories.
We remove and properly dispose of existing siding, inspect the substrate for moisture or rot before covering it, and install new vinyl to manufacturer specs. Your home gets a fresh exterior backed by a full warranty.
Insulated vinyl siding incorporates a foam backing that improves thermal performance, adds panel rigidity, and provides a quieter exterior. A strong choice for New Hartford, CT homes with high energy costs or thin wall assemblies.
We install vinyl shake on full elevations and as accent panels alongside horizontal lap siding. Proper alignment and starter strip placement keep the staggered courses looking intentional, not ragged.
Vertical installation requires different technique than horizontal lap. Expansion allowances run differently, and water management at the top edge demands precise flashing detail. Our crews have the experience to get it right.
Coordinated vinyl soffit and fascia complete the siding system and protect your roofline from moisture intrusion. We match profiles and colors to your siding for a finished, continuous look on every elevation.
Standard grade vinyl (typically .040" thick) is adequate for mild conditions and budget-conscious projects. Premium grades (.044" and above) hold shape better in temperature extremes common to New Hartford, CT and resist denting from impact more effectively. We specify grade based on your home's exposure, not upsell pressure.
Thickness is measured in thousandths of an inch (mils or gauge). Thicker panels feel more solid, flex less in wind, and generally carry longer fade warranties. We provide thickness comparisons from the brands we carry so you can make an informed choice.
Standard vinyl is the right call for many projects. Insulated vinyl is worth specifying when wall R-value is low, when quieter exterior performance matters, or when the existing sheathing benefits from the added rigidity.
Some vinyl lines carry ASTM D4226 impact resistance certification, indicating they withstand impact without cracking at low temperatures. For New Hartford, CT homes in hail-prone areas, specifying impact-rated product can reduce repair frequency and may influence insurance premiums favorably.
We assess your home, discuss grade and style options, and deliver a written estimate with material and labor broken out. No vague totals, no pressure.
We coordinate delivery so material arrives at your property shortly before installation begins, reducing the window during which it is exposed to weather or handling damage at the site.
Installation progresses elevation by elevation, with trim and accessory pieces fitted as we go rather than added at the end. Quality checks happen during the work, not after.
Your sign-off comes only when you are satisfied. We resolve any punch-list items before leaving the site and leave you with a clear record of what was installed and what is covered.
At the material level, vinyl siding is an engineered PVC product. Resin, stabilizers, UV inhibitors, and pigment are blended, then extruded into panels at controlled thickness and embossed with the chosen texture profile. The color is integral to the compound -- it goes all the way through -- so surface abrasion does not reveal a raw underlayer. Understanding this helps New Hartford homeowners appreciate why vinyl holds its appearance over decades without the repainting cycles that wood and fiber cement require.
In New Hartford, CT, where temperature swings between seasons can be substantial, vinyl's expansion and contraction behavior is the most important installation variable. PVC expands and contracts at a rate significantly higher than wood. A ten-foot panel can change length by a meaningful fraction of an inch between a summer afternoon and a cold winter morning. Professional installers account for this by nailing through the center of elongated slots in the nailing hem, allowing the panel to slide freely rather than binding. When panels are face-nailed, driven tight, or installed without adequate overlap, the system buckles in summer heat or gaps in winter cold. This is the most common source of vinyl siding failure in New Hartford, and it is entirely avoidable with correct installation technique.
Vinyl siding grades are measured primarily by panel thickness, expressed in thousandths of an inch. Products at the lower end of the market measure around .040 inches. Premium lines reach .044 to .050 inches or more. Thicker panels carry greater impact resistance, flex less in high winds, and maintain a flatter profile over long spans between studs. They also tend to carry more favorable fade warranties from manufacturers, because the pigment loading in premium grades is formulated for longer color stability under UV exposure. For most standard residential applications in New Hartford, a mid-range to premium thickness is a reasonable specification. Budget-grade panels are appropriate for low-exposure applications like enclosed porches or garage elevations with minimal sun and wind exposure.
Insulated vinyl siding takes the standard product and bonds a layer of contoured XPS or EPS foam to the back face. This foam layer does several things simultaneously. It increases the thermal resistance of the wall assembly modestly but consistently, typically adding between R-2 and R-4 to the exterior envelope depending on foam thickness. It eliminates the hollow-drum sound that standard vinyl produces when rain or hail strikes it. It also adds panel stiffness, which reduces oil-canning (the slight waviness visible on flat panels in raking light) and provides a more solid feel when the panel is pushed or struck. For older homes in New Hartford, CT with thin wall assemblies or insufficient insulation, the thermal contribution of insulated vinyl is a meaningful bonus on top of a new exterior appearance.
Cleaning vinyl siding requires very little effort compared to painted wood. Most surface dirt and mildew washes off with a garden hose and a soft brush. For more stubborn mildew, a diluted solution of white vinegar and water or a vinyl-specific cleaning product removes organic growth without damaging the panel surface. Pressure washers used at low pressure and kept away from panel joints are effective. High-pressure streams directed under the panel laps force water behind the siding and create exactly the moisture infiltration the system is designed to prevent. Cleaning vinyl two to three times per year in New Hartford, CT keeps it looking fresh without significant time investment, and no repainting is ever required.
Properly installed vinyl in New Hartford, New Hartford, CT holds up for a long time when the installation fundamentals are correct. Warranty documents from reputable manufacturers cover decades of product performance. What they do not cover is installation error, which is why workmanship warranty from your contractor matters as much as the product warranty itself. When you invest in a new exterior, the contractor's commitment to their own work is the most meaningful assurance of long-term performance. We back ours in writing.
"I was nervous about committing to a color without seeing it on the house. SOS Roofing and Siding brought samples out, held them up against different elevations, and we made a confident decision. The finished result looks exactly as we imagined."
"The crew upgraded us to insulated vinyl after showing us the cost difference and what it would do for our north-facing wall. Best decision we made on the whole project."
"The old vinyl on our house was bubbling and wavy -- classic bad installation from whoever put it on years ago. SOS Roofing and Siding removed it, found some moisture damage on the sheathing underneath, fixed it before putting new vinyl on, and documented everything. That kind of transparency is rare."
"From the estimate to the final walkthrough, every step was exactly as described. No cost overruns, no surprises, no missing trim pieces. Just a clean finished product and a crew that takes pride in the work."
